How to choose an exhaust fan for the bathroom Quakertown Electrician

After a few long, hot, and steamy showers, you notice the ventilation isn’t the best in your bathroom. Poor ventilation in a bathroom can led to mold, mildew and can even start to damage your drywall. This is where a exhaust fan comes into play. What kind of fan should you install? Here are some things to consider….. 

How to choose an exhaust fan for the bathroom

New-bathroom-design-2017

How to choose an exhaust fan for the bathroom Quakertown Electrician

 Size. First, you need to know what size you will need. Bathroom fans should have 1 CFM (cubic feet per minute) for every square foot of floor space in the bathroom. 

In other words, if your bathroom floor area measures 70 square feet, choose a fan with at least 70 CFMs to get the right amount of ventilation.

After you know what size you are after, there are 3 styles to choose from:

  1. Ceiling-mounted fans are installed in the ceiling and vent into the attic or out through the roof.
  2. Wall-mounted fans are mounted on the external wall of the house and generally are used when there is no practical way to vent through the roof; for example, a first-floor bathroom.
  3. Remote fans have a fan unit located in a remote location such as the attic; duct work connects the fan to an opening in the bathroom ceiling covered by a grill. Inline fans are often used in homes where one fan vents multiple bathrooms, or to have multiple vents in one large bathroom.

Some other things to consider

Once have you the necessary exhaust fan the fits your bathroom’s needs, here are some details you may want to look into….

  • Noise Level: Fan noise is rated by sones—a scale that represents degrees of loudness. A rating of 0.5 to 1.2 sones means the fan is exceptionally quiet. Ratings of 1.5 to 2.0 sones is very good. Fans rated in excess of 4.0 sones tend to be noisy.
  • Fans with heaters: This adds a little extra warmth for those chilly days.
  • Lighting: some fans come with overhead lighting.
  • Night light: equipped models use a low-wattage light to help you find your way in the dark.
  • Built in motion sensor:  turns on the fan when someone enters the bathroom. The fan speed can be pre-set to a low volume to remove the moisture of everyday tasks, such as shaving, and switch-activated for high-volume tasks, such as showering.

If you are thinking of installing an exhaust fan, feel free to contact us if you are in the Quakertown, Pa area. We will be happy to give you a free estimate.

 

Advertisements

Electrical Inspections tips Quakertown Electrician

Electrical Inspections tips

It’s that time of the year: real estate sales start going up and home projects start again. Maybe you are thinking of buying or selling a house. Or perhaps you may be adding an addition. There are times when an electrical inspection may be needed.

However, here are some electrical inspection tips. Here is a checklist on things you can check yourself and hire to get fixed before you hire an inspector.

Electrical Inspections tips Quakertown Electrician

Electrical Inspections tips Quakertown Electrician

1. Smoke Alarms

This an easy one. Simply, do the smoke alarms work? Is there a smoke alarms in both upstairs and downstairs? Some cities require you have one in each bedroom as well. You can call your city or look on the website to find out their smoke detector requirements.

2. Electrical Panels

Here are some things to observe:

  • Does it have a cover?
  • Do any of the breaker feel loose or warm?
  • Are there burn or charred marks?
  • Does the panel as a whole look damaged?
  • Make sure it doesn’t contain outdated fuses

3. Outlets

First, check the outlets that are near wet areas such as the kitchen or the bathrooms. Are those outlets a GFCI (which is what you will need). Next, make sure all your outlets–and switches– have covers. If you see burn marks near any outlets, you have a problem.

4. Wires

This may be obvious, but make sure you don’t have any loose wires hanging from the ceiling or other places in the house. However, don’t forget the check the outside. If you have any overhead wires that connect to the home, make sure your tree branches are cleared from these wires.

This is just a basic list that you can quickly go over yourself to decide if you need to hire an electrician before hiring the home inspection. If you need some electrical services or want an electrical take a look at you home, feel free to contact us.

Contact us for a free estimate: